Installing fuel cell in bed.

[S10gator]

I\'m installing a fuel cell in the bed of my truck. What do you guys do with your vent line? And what if anything do you put on the open end of it?



Jim

[CHEVY383MAN]

attach a AN line and loop it into a circle and zip tie in that loop. you can also run it to a high point or a vapor canister if you still have one.

[Jeffyboy]

I drilled a hole in the bed and used an old valve cover grommet in the hole and then ran a piece of hose through the grommet from the vent. I\'m not sure, but you might be able to see some of it from my pics.

[adh383]

I just ram mine through the bed-----put an old fuel filter in the end-

[Indiana]

If your fuel cell has a check valve in it, you can/should do as adh383 did. The fuel filter will keep the crud out. If you do not have a check valve in the fuel cell, you need to put a filter on it that has one. If you were toroll the truck, the check valve will keep the fuel from running out of the vent.