$horteningVS.Lenghtin drive shaft

[duckaholic40sb]

would it be cheaper to get my 4door s10 blazer drive shaft shortened, im also able to get a free 2door drive shaft, which is shorter that needs to be lengthend...which is cheaper

[chrisd]

Getting a driveshaft made shorter is usually cheaper, because to get one legthened they cut off the ends and install a new tube and to shorten they still use all of the original shaft just cut the tube shorter. Hope this helps

[Colby]

yeah ussually its cheaper to have one shortened than lengthened. I had my shortened.

[riotpolice75]

you might not have to shorten it at all theres enough companies that make motor mounts that are adjustable. before i started my conversion every single person i talked to said id have to get the drivesahft shortened and i proved all of them wrong. the only thing i did to the driveshaft was to put in some beefier u joints http://www.s10v8.com/images/smilies/icon_biggrin.gif