Bench to buckets

[Bellevensian]

hey i was just wondering if doing this conversion is it complicated; and if it takes any special parts or can i just buy two buckets and bolt em in...thanks

[Mike]

pretty much a bolt in, however your carpet or rubber mat which ever applys prob won\'t be everywhere the bench was.

[soulman4691]

keep the bench for all the ladies to cuttle up. lol

[Mike]

this says it all (mp3s/bucketseats.MP3)

[patrickwelch]

I had to add two bolts for each bucket seat, I used them out of a blazer and they fit right in.

[Fathead]

its real easy, just have to drill 2 more holes for the inside two posts of each seat, really easy

[fasrnur]

Get the seat tracks from another S-10 and add two bolts to the inside of each seat. Once you have the seat tracks you can put any GM seat from excect a Beretta/Grand Prix or Cutlas on the tracks. I have had Camaro,Fiero and S-10 seats in mine. I now have RECARO seats in mine and they are the greatest seat in the world.



Jeff....

[Diablo]

My buckets sit a little lower than the bench did... it seems really weird now, any ideas how I can make it sit a little higher, without a rigged mess... -Adam

[S10gator]

On 2002-12-26 22:16, Fathead wrote:

its real easy, just have to drill 2 more holes for the inside two posts of each seat, really easy





My concern would be if the floor where the seats are bolted are strong enough so that the bolts don\'t pull through in the event of a sudden stop???

[t-bone]

I installed the race buckets from Summit and you will need the bracket kit, it will take alittle fabrication to contour the floor .