Roll pan help

[87blazer311]

Where is the best place to get a fiberglass roll pan for an s10 blazer? I bought a cheap one off ebay and I guess I got what I paid for. It has nothing to mount up too. It looks like that the ones they sell for the s10 truck are different from the blazer?

[tben473]

i bought a lund fiberglass rollpan off ebay and i know what you meen by not mounting up but i just made some fabrications. i had to cut off the frame that stuck out which was blocking the roolpan from going on .. i cut it about a half inch away from the rear body mount. that gave me the room to put it in place. if you need more details or cant get any further let me know.

[RONSTPIS10]

you are more than likely going to have to modify to put any roll pan

[tben473]

same thing ronstpis said.. you buy aftermarket parts expect that you will have to modify most of the time. but you need pictures or anything elese let me know

[stevo67]

... if you need more details or cant get any further let me know.

I don't think he waited 3 1/2 months for a reply before finding another alternative.

And yes, Blazer and Truck roll pans are different.

MOST fiberglass parts, (regardless of whether it's a roll pan, or a hood, or a fender) are intended for "professional" installation, because there is so much involved with bonding them on properly, and blending the body work to make them look like they belong there.

My question is: Why not use steel, and weld in place? To me, and with my skill set, it seems much much simpler.