Aluminum Door Panels

[BruceS10]

I installed a roll cage in my truck and now I am looking for some aluminum door panels. Does anybody know who makes them.

[mudy851]

two places i deal with s&w race cars.com and jegs both are listed as aluminum interior kits hpoe this helps.

[Ryoung68]

Here is a link to the door panels at:

http://www.jegs.com/i/Jegster/550/40510/10002/-1

http://www.swracecars.com/store/Aluminum-Door-Panel-Kit-OSCARItem_187=95-113.aspx


Hope these help!

[BruceS10]

Has any body used either one of these panels ?

[stroker1]

A friend of mine has the panels from S&W. They are nice. He used the old stock panels to draw the pattern on cardboard. Then fit the cardboard to the door. After that I took over and cut the aluminum from the carboard template with pneumatic power shears. And then drilled holes and pop riveted it. He still has the stock door release, we just cut the opening in the panel with a dremel tool and a cut off wheel, then finished the corners with a hand held hacksaw blade.