10 bolt needed

[adh383]

Hey guys-- anyone have a 10 bolt -- even a 12 bolt camaro rearend? I need one. or do u have a 513 ring and pinion for 10 bolt? thanks

[oncearacer52]

That 10 bolt will need some serious mods to live. Especially with a 5:13 gear. Are your tubes welded to the center section? A bearing support housing cover is imperitive. These mods will more than likely cause the ring gear to fail first so at least the damage will be minimal. Of course if you are below 350 hp you may be fine anyway but, that 5:13 is going to be hard on it anyway. Good luck.

[adh383]

This will be in my dirt track car- not an issue.

[redneckgames]

8.5? or are you talking 7.5?

have to be from a camaro?

[adh383]

Guess its a 7.5---- or whatever came in the car---- 78 model.

[stevo67]

Guess its a 7.5---- or whatever came in the car---- 78 model.

Not sure which you have. 78 is close to when they changed, but chances are better that it is an 8.5.

Summit lists a 5.13 gear set for the 8.5, but nothing that low for a 7.5/7.625

[jrs85s10]

Have a complete 12 BOLT REAR drum to drum out of a CHEVELLE just get the spring perch kit from summit and weld to to the housing and you are ready to go.