LT1 A/C Delete Belt

[hreaume]

Does anyone have a source for a 93 Corvette LT1 A/C delete pulley. I have a 93 LT1 in my s15 Jimmy and the AC has been deleted. The pullley has to mount on the drivers side not the passenger like on Camaros and Firebirds. I have checked several performance places and no one has the correct pulley. I was told that Street and Performance out of Arkansas had it, so I ordered it and it was for the Camaro setup. I sent it back. Has anyone done this mod?
If so please give me some help.

[Melonhead]

What I would do is the following. You have the compressor and the original belt, correct? Measure the belt then measure the route the belt takes. The route will be longer due to the tensioner pulley. Then subtract the belt from the route. This will give the amount needed for the tensioner to take up. Measure the route again with the delete pulley in place and subtract your known amount. This will give you the size you need for your new belt. You may not get the exact, but you will be able to chose one that is very close. The best thing to use the measure the route is small string and use a tape measure on it after.