Oil Pan

[Mishoe62103]

I have an 89 2wd 4cyl, I am about to order the 4cyl motor mount kit, I was wondering if I could use a stock 350 oil pan when installing a sbc 350??? Or is there a special oil pan required??

[Melonhead]

If you are going with a Gen 1 motor, then YES you can use the stock pan. Welcome to the site.

[Mishoe62103]

Thanks for the qucik reply!!! Love this site!!!

[harleyboy]

welcome to the site and you will need the 2.8 mounts not the 4cyl mounts and like melon said if a gen 1 than you can use the stock one.

[Ryoung68]

Ditto on the 2.8 mounts and welcome to the site :headbang:

[Slimer]

Welcome to the site first of all, and another ditto on the 2.8 mount set up. Well over 900 horse here with no ploblems, YET. 1.31 60ft times to boot. I am about to swap to an engine plate though. plus the ease of the intsall with the 2.8's is a breeze.

[wild572s10]

welcome to site and keep them pictures coming in album

[s10dave]

welcome! and keep us up to date on your progress