In Car Videos in my Blazer

[Blazonic]

Here is come in car videos from this weekend at No Problem Raceway, sorry they are so long. The last pass is from the wheelstand competition. I had to get out of it cause it was heading towards the wall.



x5Mh8Bi66cI

[harleyboy]

that was awesome man. so did you get in to the finals?

[Blazonic]

No, Didn't make the field. went to fast. Truck was running 9.40's and they picked a 10.0 class.

[ZR1BLAZER]

nice. i had passes to go to that too. only 40min from my house. but something else came up. looked like fun.

[inou2]

Blazonic, that's great. Thanks for going to the time and trouble for the video. That's just what I needed on this cold-ass snowy day!

[bigdsr56]

Now that was a blast! Still should make you feel good that you are "too fast". Enjoyed the video!

[harleyboy]

that sucks man

[AfroMan2326]

that shift light was blinding oww..

[HardinValleyMagic]

Killer video! You are one busy man in there!
Dumb question time though, what are you doing after you purge the nitrous with the 2, push, buttons I persume on the dash?

[wild572s10]

that was wicked video and trucks runs strong and hard

[XTEN]

Wicked Blazer,wild ride.Thanks,I needed that...Do you ever get used to that like ya do when it stays on all 4's?

[Thunder55]

That was insane!
And I too would be very interested in what your doing with all those switches?

Sorry, newb question but it's killin me to know lol

[Blazonic]

Killer video! You are one busy man in there!
Dumb question time though, what are you doing after you purge the nitrous with the 2, push, buttons I persume on the dash?
The buttons on the top on the roll cage purge the nitrous in the air releasing any air trapped in the nitrous lines. I then use the buttons on the dash to activate the kit and purge each kit through the motor, cleaning the plugs off and removing the last little bit of air in the lines.

[HardinValleyMagic]

Thanks! I could see the purging but the 2 on the dash had me stumped since it sounded like it reved up a little when they were pushed.
I gotta say that is one bad ass blazer!

[silver_82]

you purge the nitrous into the engine? i've always known about purging it into the air but I always heard that if you inject nitrous when the engine is around idle will produce a nice technicolor explosion. I quess thats untrue, live and learn.

[vablazin]

WOW.....I so want a ride. that thing is a beast. I watched the videos on my laptop, with the laptop speakers only, and it still sounded great.

[XTEN]

I just saw you on pinks all out takes!Im still curious,Do you get used to that launch like one that stays grounded?

[Blazonic]

Yes, I hardly feel it come off the ground anymore, I can set it up to stay on the ground, but Thats not as much fun.



You can purge it through the motor at a low RPM, I wouldn't suggest at an idle, it hammers on the bearings hard at an idle. Bring it up to about 2800-3000 and "thumb" it.

[Thunder55]

Seen him off the line twice in a pinks out takes...
One bad a$$ machine.

[stroker1]

I see you are also doing engine purging, as well as myself. Are you running bleeds on your fuel noids? I am not, I'm dead heading. So that's the purpose of my engine purges. I was getting too much air in the fuel side!!?? Dunno why really, but that fixed it by engine purging. I have my engine purge set up so that the window switch is grounding the relay only when the RPMs are at 3000 or higher. That way I don't raise the hood accidentally.

Man that's impressive. I enjoyed the ride along.

[lit549]

Good question hmv,i was wondering the same thing about the buttons.NEVER MIND I DIDNT SEE YOUR ANSWER ON PAGE TWO,THATS WHAT I THOUGHT YOU WERE DOIN,PURGING THROUGH MOTOR,MY TRUCK IS NO COMPARISON BUT THATS WHAT I DID ON LAST MOTOR,COULDNT AFFORD PURGE KIT AT THE TIME,KICKASS TRUCK AND GOOD DRIVING TOO.