Polyurethane mounts (2375)

[deels95v8]

I am wanting to try the polyurethane frame mounts from the parts store, i was wondering if they will work ok on my 95, in the motor mount section there are two sets, one for the 2.2, the other for the 4.3, my truck came with the 2.2, just wanted to make sure the poly mounts will work before ordering

[racer1182]

you will need the 2.8 frame mounts which i am guessing are the ones you might be speakin of and yes they should work.

[racer1182]

http://www.s10v8.com/store/product_info.php/products_id/32

these are the ones that you need

[racer1182]

sorry bout the first post should have looked first then said something

[racer1182]

sorry finally found the ones you mentioned and yes they will work for your app then you will need the mounts for the engine side that bolt to the block and then to those.

Greg

[deels95v8]

no problem, i was wanting to try the poly's over the standard ones, seems they would be better for higher HP motors, the thing that had me wondering is why they sell two sets of complete (stock) mounts, one for 2.2, the other 4.3, If the motor plates are the same, that would lead me to think the frame mounts are somehow different, just wanted to be sure before ordering, Thanks!!!!!!!