My project 91

[Toobad101]

Ok so here is my project I will post some more pictures tomorrow. The flames are gone and the bed is off waiting on the back half. Will add photos soon. Feel free to tell me if I am doing something wrong with it.


http://www.s10v8.com/photoplog/images/13950/large/1_DSC00094.jpeg

http://www.s10v8.com/photoplog/images/13950/large/1_DSC00095.jpeg

[wild572s10]

looks like a good starter for the project

[harleyboy]

nooe your doing some thing right have fun man.

[HardinValleyMagic]

Nope sounds like your on the right track.

[Toobad101]

Put some new pictures up

http://www.s10v8.com/picture.php?albumid=214&pictureid=1992

http://www.s10v8.com/picture.php?albumid=214&pictureid=1991

http://www.s10v8.com/picture.php?albumid=214&pictureid=1989

[blazer72]

damn! you're not wasting any time

[chris1972]

Put some new pictures up

http://www.s10v8.com/picture.php?albumid=214&pictureid=1992

http://www.s10v8.com/picture.php?albumid=214&pictureid=1991

http://www.s10v8.com/picture.php?albumid=214&pictureid=1989

so thats what the manual boxs is for

[Toobad101]

Yes Sir. Got mounts today and S&W back-half on order. Just got to figure out what way the mounts have go in

[Toobad101]

Ok got the back half in today going to put it in this weekend will post some pictures

[inou2]

The Red Bull must be flowing at your place. Talk about gettin' busy!

[Toobad101]

Well got the back half was semi welded in on saturday. Ran out of time so have to go back next saturday and finish it up. Now here comes the big problem. Have to find Axles and Spool that fit the S&W 9" rear housing. If anyone wants to help me out the kit number for the rear housing is 45-1462. 35 spline

[chris1972]

Well got the back half was semi welded in on saturday. Ran out of time so have to go back next saturday and finish it up. Now here comes the big problem. Have to find Axles and Spool that fit the S&W 9" rear housing. If anyone wants to help me out the kit number for the rear housing is 45-1462. 35 spline

dutchman will make them and the 9in should take any 9in drop in..heres the number its in portland or 503-257-6604 or dutchman motorsports.com

[Toobad101]

It is a shortened rearend. That going to be a problem?

[chris1972]

It is a shortened rearend. That going to be a problem?

should be able to call them and they can tell you how to find out how long ..just telll them what you have or call s&w for the axle sizes

[mkmsports41]

I had a shortened 9 inch in my stock car. I had Moser cut my axles for me. Just a thought

[Toobad101]

Here are some pics from sat. Only took 2 due to the time crunch had to get alot in with a short time

[Toobad101]

Well we are going to wait to cut the old frame out until we get all the rear-end crap. But it looks good. The S&W instructions were a little weird but other than that it was a good build. Still have to sheets of metal dont know what they are for. I think they are for building your own tubs. But whatever we will soon find out

[inou2]

Crusin' right along, Toobad! Keep the pics coming!

[Toobad101]

Well got the spool in today from strange also got my bearings in. Turns out they are to big for the S&W rear housing. Dont know what to do next but send them back and just call S&W and see what they have to say about what to get for a 35 spline spool. But other than that got the 4:11 gears also but cant do anything till I get rest of the internals. Coming together slowly but its going