80 corvette motor-- need info

[adh383]

I found what the guy says is out of an 80 corvette--350 engine-- Looked up the block number and it says that its a Target Master/ goodwrench block-- 10066036--- heads are 462624 and morted says it could be the small valves but-- also could be 202's intake- Any opinions on this block and heads? thanks ,dennis

[spacecadet]

Lightweight thin casting mexican made block. definitley no vette motor. Thats the same motor I run in my race car.
Most likley it has 194's and 1.50 valves.
290 horse 325 torque
You can still buy this motor new:
http://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=84482

[copley87blaz]

I was going to go that rout but found a better deal they are ok

[Scuba]

Just my two cents stay away from mexico blocks they have core shift problems. Canada blocks are fine it just took them awhile to switch to the roller cam (90s). There are very few heads stock that ran th 2.02 intakes, the only few I know of are from the 60s-70s or later on in the 90's plus.