fiberglass Cowl hood

[tpyonegative911]

got a 5inch cowl hood for my truck 82s10. How hard is it to install the hood pins for them and what do you use to drill through the holes through the hood. I paid 200 for it out the door black gel coat and a screen put in it.

[ZR1BLAZER]

i put mine on and measured the distance on where i wanted the pins. then i just toke a drill bit big enough for the pins and drilled through the hood and metal. then lifted the hood and bolted in the pins and screwed on the metal rings. and closed the hood for a test fit and all was fine.

[tpyonegative911]

cool ill do it that way then thanks for the info.

[redneckgames]

same here

but just remember to measure twice and drill once

[jeremytkoontz]

I would suggest starting with a small drill bit and drill a \"pilot\" hole for the larger one.... the smaller the drill bit, the less likely you are to \"walk\" the larger bit away from the point that you are actually trying to drill. just my 2 cents

[DMONOTJR]

where did you get your hood from for only $200. do they have any more?

[tpyonegative911]

www.advantagefiberglass.net he builds them in his barn they turn out real nice i picked mine up. I dont know how much it would cost to ship.