Headman elite

[KUZIKAN]

Has anybody used the headman elite series headers? Part # 69528. If so are they a durable finish and nice fit? Where do they exit? Are they a 1 piece header? I only want to have to buy one set of headers. I had a set of shorty flowtechs, fit great, but the look and quality were terrible, they came rusted in the box new, weld splatter all over them, scratched, and the paint burnt right off. Let me know boys!!

[rudedogg]

HEDDMAN MAKES A VERY GOOD PIECE,THE FLANGES THAT MOUNT TO THE HEAD ARE A LITTLE ON THE THIN SIDE BUT I HAVE HAD MINE FOR 1-1/2 YEARS AND HAVE BEEN OFF FOR 3 DIFFERENT ENGINES,NO LEAKS,NO WARPING OF FLANGES,THEY EXIT BY THE FIREWALL/FLOOR PAN EASY TO INSTALL,THE PASS SIDE PLUG #6 IS A LIL HARD TO ACCESS BUT SMALL SACRIFICE.....

[basementdweller]

On 2003-01-04 13:23, rudedogg wrote:

HEDDMAN MAKES A VERY GOOD PIECE,THE FLANGES THAT MOUNT TO THE HEAD ARE A LITTLE ON THE THIN SIDE BUT I HAVE HAD MINE FOR 1-1/2 YEARS AND HAVE BEEN OFF FOR 3 DIFFERENT ENGINES,NO LEAKS,NO WARPING OF FLANGES,THEY EXIT BY THE FIREWALL/FLOOR PAN EASY TO INSTALL,THE PASS SIDE PLUG #6 IS A LIL HARD TO ACCESS BUT SMALL SACRIFICE.....



did you use those on stock casting heads or aftermarket race heads(Brodix, Dart, Edel, AFR)? thanks man!

http://www.s10v8.com/images/smilies/icon_razz.gif



Millenium Yellow Mike

406sb

9:1, mild cam

11.40@116MPH

<img src=http://www.OneSickS10.com/calvin3.gif width=100>

With great power, comes great responsibility.