how many parts are compatable with 94 z28 into 98zr2

[fastzr2]

hey im new to this site and been learning alot but am wodering just how many of the parts can be swaped from 94 z28 camaro lt1 6spd thats complete runs great with like 60k. ive got plans for a 427 into the camaro so i want to put the original lt1 into my 98 s10 zr2. im wondering how many of the camaro parts i can use cuz im kinda on a low budget. im hoping to be able to use the stock 460le trany in the zr2 and am wodering if i can use the camaro radiator, fans, fuel pump, and oil pan. im planning a 2inch bodylift to help for clearance and am also planning on notching the frame instead of getting corvette acessories. ive done alittle shopping around but am wondering also what parts im going to need as far as mounts, headers, or driveshafts etc. any sugestions, coments and help is greatly apreciated cuz im gunna need it. thanks guys



dave

[spacecadet]

The lt1 is \"the same block used for years. multiport fuel injection, you would have to make that work in the s10. I believe there is a company that makes a \"swap\" wiring harness for it . The rad and fans won\'t fit. The fuel pump should work in the s10 as it is. That pump however may not with in the camaro with the 427 unless your doing fuel inj. onit to.

Space.



Welcome to the site!!!

[jrws6]

CARB YOUR LT1 AND RUN AN AUTO TRANS FROM 4L60E 4X4.

[6SPDS10]

I used the LT1/LS1 electric fans on my truck.....a little trimming here and there and it looks factory.



Welcome to the site.



Bubba