View Full Version : speedometer help
chevy262ss
12-12-2005, 05:15 PM
i have a 94 s10 with 4 banger and 5 speed, my question is how can i get a speedometer to work, i plan on running an older th350 with 9 inch tailshaft.
spacecadet
12-12-2005, 05:26 PM
You could swap cluster for an older mechanical one. 86-89.
I don\'t think thiers a kit avalible to do what you ask.
Space.
Ryoung68
12-12-2005, 06:30 PM
The transmission tailshaft can be swaped for an electronic pickup version.
Knanthrup
12-12-2005, 07:59 PM
On 2005-12-12 23:30, Ryoung68 wrote:
The transmission tailshaft can be swaped for an electronic pickup version.
yep, might even be able to modify the one you have with the proper electric ring sender inside
chevy262ss
12-13-2005, 12:40 AM
also does my RWAL run the vehicle speed sensor on the tranny or at the diff.
chevy262ss
12-13-2005, 03:34 AM
can i use a 700r4 from a 94 and have the speedo still work, i have a 5 speed in it now
Ryoung68
12-13-2005, 04:04 PM
I used a 1984 700R4 and had the tail shaft swapped with a later model with the electric sender. Also the speedos were changed to electronic circa 1989 and use a DRAC module which converts and relays the signal from the trans to the speedo.
chevy262ss
12-14-2005, 02:17 AM
thanks im now on tha hunt
vBulletin® v3.7.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.