headers for Dart angle plug heads

[xtremewheelz]

Hey everybody, I have been a viewer of the site for awhile, but a new member. I have angle plug Dart heads (part # DRT-10311111 from Summit) on my motor and am trying to find a set of headers to put on. The Hedman shortie headers will not work, so I am looking for an alternative. Any help would be greatly appreciated. Thanks in advance.

[BrickTop]

i have angle plug heads with the hedman long tubes, not the race headers or the fenderwell headers, but the normal 1-5/8\" full length headers. they are like 275$ or so and will work with angle plug heads, but you will have to change your motor mounts and maybe the motor mount shells that bolt to the motor, and make sure you run an oil filter relocation kit. good luck!

brick.

[grimpuppy]

I have the same headers. They work pretty well with the angle plug heads. If you look at my pictures, I have several showing the headers and how they fit.

[xtremewheelz]

Grim, I see your headers are 3 different pieces. Did they come this way or did you make them this way? Due to them being multiple pieces how do they come together in the collectors still? Thanks.

[phil33875]

i used the hedman hussler series header for my setup. i have the angled plugs with raised exhaust ports, as with everything else they didnt work.hedman claimed they did, but i had to pay someone to modify them and have them ceramic coated. ended up costing me over a grand with the actual cost of the headers. there is a slip on collector that all the pipes go into. its alot of fun getting them to go together, but they work.