lt1 and regular 350

[cloptonw]

what would i have to do to put lt1 head on a regular 350 and what intake would i need and also i would like to know what intake would i use on a lt1 to replace throttle body i need to know what will work both ways.

[ChevyKiD_69]

i think they will bolt on no problems i figure if the exhaust manifolds will the heads should to do some reading on it. to me it sounds like they will. nick

[ZZ4Blazer]

LT1\'s got reverse flow heads.



Technically, they will bolt on, but they wont work. I think you can modify them, but its not worth it.

[ChevyKiD_69]

hey zz4 how do they flow in reverse i have never delt with them. nick

[tracker]

the coolant passages have been reworked in the block and the heads to cool the heads first and then the block. non-lt1/4 motors cool the block first then the heads.



this design was used to enable the use of pump gas with a higher compression ratio. most lt1 uses a 58 cc chamber with 10:1 compression but i could be wrong.