Fornt spring recommendations

[Ike]

Go figure, my front end is sitting a little low. Does anyone know of a good direct fit spring that\'ll hold the front end up at the stock heighth?

[racer1182]

if it is 2wd you want front springs out of an extra cab s10 with a 4.3 they are supposed to be the toughest out em all. Hope this may help you.



Greg

[Ike]

Mine\'s a 1990 Blazer originally with a 4.3, I was wondering if camaro or caprice springs would work.

[racer1182]

as longas they are the same diameter they will work



Greg

[gdmclnh]

Chevy G body front suspension is the same. 80\'s monte carlo etc.

[rudedogg]

so far the best spring that i have found is the monte carlo SS spring \'83-\'88 they really make an s-truck handle! http://www.s10v8.com/images/smilies/icon_wink.gif add polyeurothane bushings to the front sway bar and put a rear bar in w/poly bushings,dearch the factory springs out back and let me tell you guys in corvettes,porshe etc. just look at you funny when you hit corners together http://www.s10v8.com/images/smilies/icon_razz.gif