Skeeter74
01-22-2007, 06:44 AM
I still do not know the cause for sure though. If you anybody read my previous post you will remember I had a low oil pressure problem at idle. I took the motor back apart. and checked it out. The only problem I saw was the cam bearings looked really bad. it looked like somebody baet the hell out of them. I took it back to the machine shop and they installed new cam bearings,checked the clearnces on the crank and washed everything real good. I put it back together with new bearings and oil pump. Now it idles at about 60 lbs. Now I need a roll cage and shifter and I will be ready...