Frozen injectors... need to replace

[MDCodeRed]

I\'ve got a 95 S10 that\'s been in the works for 3 1/2 years now. The engine has a TPI setup from about an 87 Corvette. All the fuel injectors are froze up and need replacing. Looked in Jegs at the injectors and I\'m really not sure what I should be replacing them with. What size (lbs) and brand do y\'all recommend? I\'m so close to getting this truck running and I want it to run good! It may see a strip from time to time, but it will be my daily driver. The engine was built be my buddy and myself and we estimate 375 to 400 horsepower at the flywheel, so i don\'t want some crappy injectors to hold me back...



So what do y\'all think? Any help will be appreciated. Thanks!

[DMONOTJR]

well i don\'t know how much help i could be, but if i was you i would find out as much info i could about stock ones, then go a few lbs pressure more than stockers. i don\'t know much about fi, so i couldn\'t tell you what lbs injector to use

[Melonhead]

19lb injectors are stock for 305. The injector size should be around 24lb. The question is with cam heads and all the changes to a stock setup, DID YOU BURN A NEW CHIP???? The best thing to do is a phone call to TPIS. (http://www.tpis.com/index.php?module=contact_us) They helped Chevy develop the TPI system. They are pricey, but you will get quailty. By far they are the best people to ask. http://www.s10v8.com/images/smilies/icon_smile.gif