head gaskets for iron head 383

[bowtietd]

Block is .030 over 383 stroker and I am using Dart Iron Eagle heads. What head gaskets do you guy's recommend?

[adh383]

I would use a top of the line felpro.

[stroker1]

Depends on compression ratio and application. Gonna spray it?? The gaskets with the raised up blue rubber beads will probably work good. Not the regular old perma-torq gasket. Sorry I can't remember part #s worth a damn.



But if you got crazy compression and gonna spray more than 100 shot I would go with a multi-layer steel gasket. Like the cometic or felpro MLS. I run the Felpro MLS. You can see them in my gallery. I actually prefer the cometic.

[grimpuppy]

Felpro 1003 - I have not had a problem with them yet 13.5:1 compression. Used them on my Iron heads and now on my aluminum ones.

[bowtietd]

Thanks' for the info. Comp. is around 10.0:1 and I am not planning on spraying the motor.

[wheelspin]

got cometic on my 406 and have had many buddies use them they are the sh*! peroid