Upper Rad Hose

[srausaf]

Seems that the hose the book recomends is a good fit however it makes it sit higher than the rad filler neck..Any suggestions on a different hose/t-housing combo?



Its a carbed 350 and the rad is in the forward position.

[adh383]

thats the hose I used------ works great.

[racer1182]

buy one of those flex hoses that is just the right length and run it that way. Hope this helps you.



Greg

[Indiana]

What racer1182 said is the easy way. It really doesn't look too bad, unless you are trying to make it look factory.

[chevy262ss]

not sure what the book recommends because i don't have one. But i used an upper rad hose from an 85 cutlass with a 307, works perfect looks stock. doesnt sit higher than the fill.

[mxkx48]

i got a rad hose from auto zone, its from an 80 corvette and fits perfect if you cut about 3 inches off the part that goes into the rad.

[wheelspin]

80 camaro hose lil adjusting but no kinks or wrinkles

[wheelspin]

[383sonoma]

early 70s camaro 350 right bend a little long needs to be trimed the manaul # didn't work on mine

[Jimmybeam]

Don't know what the book recommends, but I'm using the stock hose from my 4.3. Fits perfect with my setup.

[harleyboy]

76 impala with some trim to fit.