PDA

View Full Version : Where do I mount my electric fuel pump?

Jon
06-18-2002, 07:48 PM
II\'m trying to figure out where to mount my electric Holley Fuel pump in my 2wd S-10 Blazer without having to by too much new fuel line, please help!!!
knudsonm
06-18-2002, 07:53 PM
As close to the tank as possible. Pumps work better pushing. Mount it on the frame rail or the bottom of the body by the tank.
Mike
06-18-2002, 07:54 PM
I\'m not sure what your talking about?
Jon
06-18-2002, 07:55 PM
No duh
Jon
06-18-2002, 07:57 PM
I already know that I have to mount it as close to the tank as possible, but I\'m trying to figure out where to put it.
knudsonm
06-18-2002, 08:06 PM
I have mine on the bottom of the body right by the tank. I then ran new line to the frame rail original line(about 3ft). I then ran a new line from the original line under the hood up to the carb(about 6ft).
ZZ4Blazer
07-19-2002, 10:48 PM
I mounted my Holley \"red\" pump on the gas tank crossmember in my blazer.
Trickten327
09-23-2002, 09:28 AM
Fellas, I have a TPI 350. what is the best fuel pump for the $$ ??? THanks

ALex
knudsonm
09-23-2002, 09:35 AM
For a fuel injected engine the stock in-tank one is the best for the money.
Trickten327
09-23-2002, 09:58 AM
I already have a JAZ 16gal fuel cell. Any suggestions?
rudedogg
09-23-2002, 01:48 PM
you\'ll spend 150.00 from autozone for this pump but its worth it (1984 MECEDES) GAS ENGINE OF COURSE...we use them on all efi-hi pressure fuel sytems,my old blazer had a tpi 350 using this style pump,i put over 40,000 mi. on that war wagon no probs.it flows 190Lph..
Trickten327
09-23-2002, 04:06 PM
rudedog, you are the man. I appreciate that! http://www.s10v8.com/images/smilies/icon_biggrin.gif
4more
09-23-2002, 04:51 PM
i have mounted the pump on the frame right in front of the shackle for the leaf spring
pokey
09-26-2002, 06:54 AM
hey people my 84 gmc with the Isuzi 1.9 and 4-speed Isuzi came with an electric fuel pump stock on the frame rail,I PLAN on using it and the fuel lines for a carb mtr.I will take some pics of the whole thing.By the way GM PART #6472657 is the one for carbs 6-9psi at 30to40 gallons per hour
RONSTPIS10
10-13-2005, 04:37 PM
the tpi conversion book suggest using a electric pump out of a 280z 78-80 nissian part number 17011-p7211
Scotty_S-15
10-13-2005, 05:32 PM
I think ZZ4Blazer\'s recent quote would fit this thread nicely..... http://www.s10v8.com/images/smilies/icon_razz.gif





On 2005-10-03 06:26, ZZ4Blazer wrote:

Holy old thread batman!!!