How much do s10's weigh?

[1993S10V8]

Was just wondering how much my regular cab short bed curb weight is? I figured aroung 3500lbs but not sure, Any info would help.

[adh383]

I wopuld say you are close--- but probably a little less--32--3350 my 84= 2910 with me

[Bakas]

mine weighs 3000 flat with me in it

[1993S10V8]

I guess yours is a regular cab too. Wow thats pretty light.

[Bakas]

ya mostly stripped no luxury stuff, and i still drive it on the street lol!!

[1FastBlack1]

Mine weighs 2,720 lbs w/o me in it. Thats a racing seat, aluminum dash, no tailgate or bumper, no fenderwells and no spare etc.



I myself weigh 310lbs and still run 7.40's. http://www.s10v8.com/images/smilies/icon_biggrin.gif

[kreinhederta]

Mine is a long bed with the whole interior and the inner fenders removed. 2820 with o10 gallons of gas.

[s10maniac24]

i had a '92 reg. cab, short box, tahoe pkg with the 2.8L. it weighed exactly 3000lbs with half a tank or so.

[wagonboy]

2660 without me 2860 with me... you do the math....



thats no inner fenders, empty stock dash, one race seat, tubbed with draglites, 18 gallon fuel cell, and a 9" ford rear

[wheelspin]

I got a regular cab no tailgate, steel hood all bumpers in place, stock roll up windows full interior 2890 without me in it and 1/4 tank

[spacecadet]

When i went to the scrap yard, they weighed my blazer in at 4450. However thats with me @ 150, a snowplow frame hanging from the front , a towhitch, winch and a nice size tool box in the back.

My trucks a red brick shot house!

Space http://www.s10v8.com/images/smilies/icon_biggrin.gif

[mzoomora]

RC/SB with full factory interior, no AC, and me in it with 1/2 tank was 3200 or so. It also have a vinyl tonno, bed liner, sub and box/amp, snd s few extras. But it did have a rear nroll pan and fibergalss hood(which weighed about the same as stock)

[ymyhere]

My 1991 shortbed S10 from the factory with 4cyl, manual and A/C was 2648 lbs. It's now 3100 lbs. with a LT1 and 4L60E.

[1993S10V8]

Thats a sweet truck!

[silverdime]

My 89 S10 regular cab shortbed is weighting it at 2915 with me in it and a full tank of fuel. With 52.5% rear weight.

[rusty_cage520]

I got a lot of good info from edmunds.com I believe. This too.



http://autos.msn.com/research/vip/spec_Exterior.aspx?year=1988&make=Chevrolet&model= S10%20Pickup&trimid=-1



I did a lot of searching on the weight of a typical 60's or 70's v8 over my old 2.8 liter and the weight of my 700r4 over the old 5speed. I don't remember all the links but if you search long enough you can find pages that specialize in the weights of these components. Here's what I figure...



2.8 v6 weight: 350lbs

327 v8 weight: 575

man. tranny : 110

auto tranny : 184



225+74 = 299 (bout 300)



2710 orig. weight of extended cab 2wd 2.8 plus 300 = 3010 plus weight of driver and gas probably close to 3250 or more.



Hope that helps. results may vary, lol.