Fuel pressure regulator

[Quick_Cal]

I have a 88 2.8 S-10. I just bought the truck and yanked the motor out. So I really am not familar with the truck yet. I remember seeing something looking like a large fuel filter or regulator on the front of the 2.8. Wich is it, regulator or filter.



Next, I\'m putting in the 91 TBI 350 out of a Suburban. Where would the regulator be on that.



Where should I put mine. On the motor or the frame some where. I did take the lines that connect to the tbi off a later model 4.3. But I didn\'t notice a regulator. (wasn\'t looking for one) Wonder if that regulator set up would work on my 350.



Any Idea\'s, thank\'s

[MOREPOWER]

the fuel regulator is built into the throttle body! so just hook up the lines to that, and the other thing where is it located, i think maybe ya thinking its the canister, is it black, if so it just holds the fuel vapour.

was the motor in it a carb or fuel injected before ?

[Quick_Cal]

The other thing is defenatly not the black canistor. It is bolted to the enginge. I will take a pic of it later. Thank\'s

[Quick_Cal]

I just went over and got a good look at it. It\'s a fuel filter.http://www.s10v8.com/images/smilies/icon_biggrin.gif