Radiator repositioning

[Zack]

For those of you that moved your radiator into the AC condenser space -- how did you do it, and what did you have to modify to get it in there?

[ZZ4Blazer]

Cut a little bit of the supports on the sides for clearance. Massaged the bottom, and cut a hole for the cap to stick out the top.



Easy if you have some type of cutting too.

[newsomemichael]

I cut alittle off the bottom,side and some off the top but iam useing a taller radiator and made my own mounts to hold it in place.

[S10gator]

On 2003-03-20 22:33, Zack wrote:

For those of you that moved your radiator into the AC condenser space -- how did you do it, and what did you have to modify to get it in there?





take a look at my pics... shows the area cut out and the mods made to make the rad fit...



Jim

[350-s-10]

my radiator is just smaller than the ones that other peopole use..... i just had to make my own rad shroud which wasnt that hard to make at all! go check out my pics on my site, www.cardomain.com/id/trucky350