Can\'t find a 37 degree flaring tool

[Trickten327]

I\'m tring to flare my factory 1/2\" steel fuel line to accept Russell steel braided fuel line and fittings. I called a majority of the tool suppliers, auto parts stores, and race shops around me. Any suggestions?? Timing is important. THanks

[fasrnur]

I think your problem is going to be that your truck doesn\'t have 1/2\" lines. That is more like race car size. You more than likely have 3/8\" lines and will be able to find this easier.



I have never seen an S-10 with that big of line. How are measuring you fuel line?



Jeff....

[my454s10]

3/8 still sound big for a stock fuel line...it may be 5/16.......size 8=1/2...size 6=3/8

[Trickten327]

You\'re right. it\'s not 1/2\" sorry bout that. I\'m looking for the tool for the fuel supply line. I have a set of capliers at the office. I\'ll take them back home and recheck that size. Any idea on locating the tool???

[Trickten327]

I found a company called Rigid that make one and sells direct. Thanks anyway.