PDA

View Full Version : Newbie!!


ridz
09-10-2002, 02:04 AM
Hey everyone, just registered. would like to know who has a V8 in a 94+ S10? I have a 95 & have been thinking about doing the swap!!

thanks yall

http://www.s10v8.com/images/smilies/icon_biggrin.gif

mommasboy
09-10-2002, 04:09 AM
Welcome, ask what you need to know and you\'ll probably find out at least 5 oppinions. http://www.s10v8.com/images/smilies/icon_wink.gif

ridz
09-10-2002, 06:30 AM
Well for starters, where can I get some motor mounts? I know of a guy who can fabricate some for me! and the 5speed I have in my truck (NV3500) now, bolt\'s up to an eight?



and of course, what type of eight should i put?

305, 350........



thanks everyone!!

Mike
09-10-2002, 06:44 AM
PARTS.S10V8.COM (http://parts.s10v8.com) is where you can get the engine mounts made for the s10 v8 swap.

ridz
09-10-2002, 07:33 AM
Thanks again!! http://www.s10v8.com/images/smilies/icon_biggrin.gif

ZZ4Blazer
09-10-2002, 08:38 AM
Since you claim to have the NV 5 speed, I\'d assume you have a 4.3 in there now. It will bolt up fine. It is just about as strong as most factory V8 transmissions. I used the Stealth conversions motor mounts. Pretty happy with them. Unless your building your own motor, I\'d stick with a good old 350. Most factory 305\'s didn\'t have much more hp than the newer vortec 4.3, and they weight a whole lot more.

ridz
09-10-2002, 09:31 AM
Thanks ZZ4! http://www.s10v8.com/images/smilies/icon_biggrin.gif