View Full Version : Leaner..
Sinful10
04-28-2003, 06:48 PM
Ok, I need some help here, small problem with my 82, it sits about an inch lower on the driver side. Doesnt sound like much, but from behind, it looks like hell. Has 2\" blocks in the rear. sits just about the way I want it to, accept for the lean. I changed the entire rear leaf spring and the front coil on the low side, didnt help. I know shocks dont support, but would a bad one cause this? A local motorhead said he thinks I might have bent my frame cause of the torque from the V8. Any help would be appreciated...
Sinful10
04-28-2003, 10:45 PM
Damn, I didnt think it was that dumb of a question LOL..
wickeds10
04-28-2003, 11:40 PM
i dont think the frame is twisted but i would check the body mounts on that side to see if they r still there
ZZ4Blazer
04-29-2003, 12:43 AM
S-series are notorious for the lean. Its just the pimp lean, didn\'t you know? LoL.
My rear end has about an inch difference. Front about 3/4\".
You can cut a little off the higher side front spring. Or shim the lower side up.
vBulletin® v3.7.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.