700r4 plug?

[BadBowtie]

Ok my 700r4 has had the torque converter lock up not working cause i didnt have it wired properly. i got a new plug to pug in the tranny but this one has 3 wires on it and my old one had 2. my 4th gear switch and the lock up selinoid are hooked up together internally so i only need to run a power wire and a ground wire, but i dont know which of the terminals to run it power and ground to, anyone know?

[RONN454]

you should look in jegs, they have a torque conv. lock up kit that will lock and unlock the conv. when you accelerate or down shift. i talked to a tranny shop and he said the 12 volts can\'t be constant or the tanny won\'t shift correctly, and if the lock up isn\'t working it will burn up the tranny.

[BadBowtie]

ok well right now i cant afford the lock up kit so i just need to know whic terminal on the plug to run the power to and which on e for the ground. http://www.s10v8.com/images/smilies/icon_crazy.gif

[wbarnzey]

Look at the plug .It is marked [A,B,C,D] A is hot[12V] D is ground

[BadBowtie]

Thank you wbarnzey,

That was exactly what i was looking for. i though it was a and d i just wasnt sure which one was power and which was ground.

Thanks again!