Tranny Temp. Guage

[mommasboy]

Anyone know the best place to put a tranny temp guage? I have looked all over my tranny and can\'t find a place to put it, except tapping a hole for the sender in the bottom of the pan.



Know of a better place?

[knudsonm]

1/4\" NPT TEE-fitting inline on the hot side anywhere before the cooler. I recommend an electric just because of the easy of installation and header heat can sometimes mess up the mechanical senders coil going to the gauge.

[rudedogg]

yup!!!!!!!! thats exactly what i was gonna say,you definately want to monitor this temp especially with a stall,should be factory equipment...

[mommasboy]

Well i already have the guage, it and one of the oil temp. The oil temp one i am going to tap into the side of the pan near the bottom. But the tranny one i dont know if i am going to put it in the pan or what.....kinda hard to put the sender in the line leaving the tranny when that line is rubber.