Throttle Cable

[yankeer6]

What did you guys do about your cable? Mines too long and after I route it with a sharp turn it works hard. Do they make a shorter one? I had a 2.8L in a 92. TIA



Chris

[Mike]

i just went to the parts store and got one for a 90\'s fullsize truck, works great, take your old one in and get one shorter with the same connections, mine works great.

[my454s10]

mine is from a 80 chevy monza ..it works like a factory cable .... http://www.s10v8.com/images/smilies/icon_biggrin.gif

[mommasboy]

I used to break the stock one all the time...And trust me you dont wanna break it when your 45 miles from home and its 1 am....But anyway, i did just like mike said, i went to the junk yard and got one off an early model full size chevy. I only did this cause the connections looked the same and i needed one cause the speaker cable we rigged up was bearly holding. http://www.s10v8.com/images/smilies/icon_razz.gif But it has never broke or bound up on me.

[yankeer6]

Easy enough...thanks a lot guys! Off to pick-n-pull.

[4more]

i used one from a mid 70s camaro it fit geat but only gave me 1/2 throttle so inside the truck i used fishline weights to hold the cable in more so i got full throttle

[bohn333]

Mine is off a 86 firebird that had a four barrel. Its alittle long but works well.

[knudsonm]

Stock \'90 4.3 TBI Blazer throttle cable

[yankeer6]

Does the 4.3 have th throttle linkage on the driver\'s side like my carb does...if this is the case I would think that would work good. That\'s the problem, the 2.8 had the linkage on the pass side and now with the carb....

[knudsonm]

Yeah the throttle linkage is on the drivers side on the TBI equiped 4.3\'s