4x4 question

[TwiztedMods]

If i put a 350 in my 4 wheel drive s-10, will it make my front end sag to much?

[evil_admin]

prolly not too much. You have torsion bar front suspension and you can adjust it. On the center cross member where the bars end (or start) the bosses that hold then have a grade 10 bolt with really fine threads. By turning this bolt you can add and remove tension to the bars. Be aware that it is really easy to screw it up so take it slow. Only go with a quarter turn max each time you make a change.

[TwiztedMods]

thanks