JESEL SS ROCKERSHAFTS

[MARKYMARK]

I WAS THINKING OF GETTING A SET OF JESEL ROCKER SHAFTS FOR MY ENGINE. ANYBODY KNOW SOMEONE WITH THEM? PROS OR CONS ABOUT THEM OR OTHER SHAFTMOUNTED ROCKERS? I\'M RUNNING A 355 WITH 12.5-1 COMP, SOLID ROLLER CAM 630 LIFT 312 DUR ,BRODIX HEADS

[my454s10]

my dad had a 7.20et rear engine dragester several year\'s ago...with a nitrous injected small block...and he had problem\'s with the valve train cause he was turning 8500-9000 rpm...so he swithched to jesel shaft rocker\'s..and he never had a problem with it again...the only draw back is that they are like 1000.00$$ ..if you have the money i would dang sure get them...

[gdmclnh]

Unless you are into seriously high rpm upper range with very high valve spring pressures, shaft systems are not necessary. They are expensive. Stud girdles may be a better option unless you really think you need the shaft system.

[MARKYMARK]

I RAN THE STUD GIRDLE SET UP ON MY CAR AND BROKE STUDS OFTEN, IDONT KNOW IF ITS BECAUSE OF THE KILLER ROLLER SPRINGS OR TO TIGHT OF VALVES OR THE 8500 RPM