TURBO 350 LENGTHS? ANY EXPERENCE OUT THERE?

[doghouse]

I plan to use a turbo 350 trans for my conversion.



Is there any length that is best to use.



Long/ short etc?



Will i need the shaft yoke from car the 350 cam with?

[BUBBA]

Check out the new car craft mag.

They show you how to identify all gm transmissions and dimensions of all.

Check it out it helped me out on my swap.

[91s10350]

i used one with the long tailshaft. i had to have my driveshaft cut about 1.5\" and rebalanced. this is different on every swap because of the placement of the motor.the mounts are made with adjustability. i would recommend that you get the motor and tranny mounted where you want them and then size up the driveshaft.

[80Harley]

I used the TH350 Long tailshaft (9 inch) and my stock driveshaft. No problems.