PDA

View Full Version : Bucket seats


blue82s10
01-17-2004, 10:39 PM
Will 2wd blazer bucket seats fit in my reg cab 82 s10 londbed?

IceQueen
01-18-2004, 02:28 AM
yep and you can make any seat fit if you really want to!

afghanimobilerawks
01-18-2004, 02:06 PM
you will just need to put in mount bolts for the seats tho...

i had an extended cab at first, and im putting the buckets from tht ito my reg. cab

cs10v8
01-18-2004, 07:53 PM
yea right know I have seats from a full size but I am going to put some custiom made seats in it for a 5 point harness

primed92
02-22-2004, 09:40 PM
I bought buckets from a 90\' jimmy that bolted right in and even matched my interior......

Lancer
02-23-2004, 08:23 AM
any seats from a gm vechile should bolt right in, maybe not fit, but will bolt onto the slides

fasrnur
02-23-2004, 09:08 AM
The 88 up Regal/Cutlass/Grand Prix front wheel drive seat will not fit do to the fact that their seat tracks are part of the frame of the seat. Otherwise most any other GM seat will fit the seat track. Bolt them in sir!



Jeff.....

Mooseback
02-23-2004, 09:46 PM
I replaced my bench with bucket seats out of an ext cab s10 and they fit nicely.

TwiztedMods
02-24-2004, 09:30 PM
Hay a really cool Setup would be Pontiac Fiero, and use the center back pice, the also have speakers in the headrest area... Check it out!

cashone
02-26-2004, 05:39 PM
I put some tenzo-r race seats(yea i know tenzo is rice) but the price was right!! and they came out good.. and i\'m not the slim fit guy eather!!!

fasrnur
02-26-2004, 06:54 PM
Fiero seats fit directly on the S-10 tracks. I had a couple of pair in both my truck and my blazer. They do hawever make the old bum num after a couplle of hours on the road.



Jeff.....