I need a Wiring Diagram Camero

[Lin]

I have not found a wiring diagram for a 1989 camaro TBI 700R4 Does anyone have on? Also 1989 s10 2.8 tbi 5 speed? I need to graph the two together. http://www.s10v8.com/images/smilies/icon_confused.gif

[wickeds10]

both engine harness\'s are the same just change the computer and distributer.

[Lin]

Have you done this? Are you saying just use the S10 harness? lin

[JayDee]

You should be able to plug the Camaro ECM right into the harness in place of the 2.8 computer. Since they are both TBI and both 89 there is no reason it shouldn\'t be a plug and go. Same on the distributor. You may have to drill or ream out the hole in the big wire on the starter because the V8 solenoid has a bigger bolt (3/8 vs 5/16 I think). You may also have to lengthen the alternator wires because the V8 is aprox 5\" longer. If you do, solder them and shrink wrap them. You don\'t want those wires shorting out. It could fry the alt. or the whole harness because they are not fused. If you have any specific problems PM me and I can help you out. I\'m pretty sure I have both those wiring diagrams also, if you find you actually need them.