Sway bar help, please!

[BadBowtie]

Hey guys,

I have a 1987 s10 blazer 4x4.

I went to replace the sway bar bushings on the frame and control arm.

Well now i cant get the swaybar back in the right place.

Does anyone know how to put it back together?

[bohn333]

sometimes when you remove a sway bar it spreads out from not being under pressure. if you can connect it to the frame do that first. the take a pry bar and try to spread the links on the A arms out until they connect back onto the bar. i hope that will help you out alittle. http://www.s10v8.com/images/smilies/icon_wink.gif

[4more]

ya they can suck to put back in place try raising or lowering the truck to change the angles of the control arms

[MOREPOWER]

Don\'t forget to use the other english book language ya know $*%^^ http://www.s10v8.com/images/smilies/icon_wink.gif goodluck with it thou

[BadBowtie]

Thanks guys,



I didnt realize the sway bar had so much force holding into place. i have it loosely bolted to the drivers side control arm but i cant get it to line up with anything else.