I alright I need some help...

[xeniadrums]

I took the computerized 4cyl out of my 87\' s-10, and replaced it with a carbed. V8....



My truck is the most bare stocked of that year(i.e. no ac, no power anything, no dash gauges). Can anyone tell me what or how much of the wires I need to keep? Can I just take the computer all the way out? Any help would be greatly appreciated.

[RON]

87 BLAZER YANKED THE WHOLE COMP. FROM UNDER DASH ON PASSENGER SIDE DO NOT NEED PULL FUSES TOO. I PULLED WHAT I DID NOT NEED SUCH AS WIRES FOR FUEL SYSTEM AND SO FORTH. YOU CAN USE STARTER WIRES. YOU CAN EVEN HOOK STOCK GAUGES IF YOU WANT. IF YOU USE ELECTRIC PUMP IN TANK YOU HAVE TAPP INTO THE WIRE FOR IT. BECAREFULL WHAT YOU PULL TRACE IT OUT TO DO A CLEAN JOB.