Lug nuts for ZQ8 rims

[waspp]

Hey,

Does anyone have,or know where i can get a set of lug nuts for the 1996-2001 S10 ZQ8 rims.I bought a set off ebay for my 92 ext. cab S10 V8,but the stock lugs won\'t work.If someone can get me a partnumber,that would work too.Thanks alot.

-Zac

[DJ-Fla]

have you tried to mount them up yet? For What I have run accross, the newer zq8 rims have a smaller hub design. If you can get them over your hubs, you should be able to use a standard acorn style lug nut, check with your local parts store to find out the size.

Good luck

DJ

[Jeffyboy]

If they don\'t go over your hubs, just open up the centers with a sandpaper flapper wheel.



Jeff

[Bobwilson84]

open the holes a bit with a die grinder, and use conic seat lug nuts... pep boys sold a kit with all new chrome lugnuts and locks for under 20 bucks. Make sure you get conic seat.

take it easy

[waspp]

Thanks for the tips,the holes for the lugs arn\'t the cone style lug nuts,they\'re flat,but i checked at a local chevy dealer and the lugs showed up as the coned ones.I\'ll see what i can come up with,thanks again.

[Bobwilson84]

well, for the record, I have the rims, and they are on my truck right now, and they havent fallen off yet, and I\'ve been to the alignment shop, and yea. You need conic seat, you might be able to get away with the acorn nuts, but I dont think they would do as good of a job centering the wheel.