PDA

View Full Version : taurus fan wiring


ZeroGravity58
07-24-2004, 07:48 PM
ok i went today and picked up a taurus fan from a 92 3.8 taurus. it has three wires coming off of it. How do i wire this thing up? i know i probally need a relay but im not to good with that stuff. if anybody has a diagram or can explain it i would appreciate it. im trying to get all my parts together before i tear into my truck for my swap.

eurekarobert
07-24-2004, 10:22 PM
http://www.s10v8.com/myegallery.php?&do=showpic&pid=2230&orderby=

Bluesman
07-25-2004, 07:33 AM
The black one is the ground (what a surprise). The other 2 are for the 2 speeds on the fan. The larger one is (I think) the normal speed when its time to chill a bit; the smaller one is (I also think) the one that comes on when you turn on the AC. At least that\'s how I wired them. If you don\'t have AC then just use the larger wire for cooling.



Wiring info can be found at...



http://s10v8.com/viewtopic.php?topic=6571&forum=7&15



You should run this fan off a relay as it draws a lot of current.



Dave