RESTORE

[s10camaro_ho]

Has anyone used this product. Your suposed to put in when you change your oil and will restore compresion. My 2.5 was running nice and oil pressure was at 80. Since I changed the oil and put restore in it always going nuts idles at 20-40, and pressure barely changes under acceleration unless I\'m geitng on it which I don\'t often do cause it\'s my only ride.

[ZZ4Blazer]

80 seems kidna high. Sure the guage is working properly? Idling as low as 20 is nothing to worry about. Im told 10 psi for every 1000 rpm is fairly good.

[s10camaro_ho]

Is that a good general rule? 10psi for every 1000Rpm\'s? I thought for the 4 banger 80 was really good. Most 4 cyl. I\'ve seen have high oil pressure. My uncles new S10 pick up with a 2.2 in his 2nd gen runs 70psi all day long.



As far as my gauge working I wouldn\'t be surprised if it isn\'t reading right cause my temp gauge has never moved and my gas gauge is broken ( stuck at 3/4 ). Even so the oil pressure never went that low before I put the restore in, but if you say I\'m good I\'ll believe it.