fan wiring

[smoothdime]

what is the easiest way to wire the tarus fan to be on all the time or on with a on/off switch

[smoothdime]

i mean low on all the time and high on a toggle switch

[wild85]

You don\'t want that thing on all the time. You will thank me later! Just wire in a switch, I have a switch operating my 12\" fans.

[smoothdime]

ok both on a toggle switch

[AllanT]

dont just put it to a toggle switch beleive me i have burnt about 3 u need to put a realay inbetween the toggle and the fan and no dont hook both just hook the high or low up i use the high myself

[smoothdime]

so you use just the high then a relay and then the switch

[Indiana]

Okay, why wouldn\'t you use a temp sensor for this? I probably would forget to turn it on. I forget to turn things on and off.

[smoothdime]

its not going to be on for very long periods of time and just one more thing to go wrong

[wild85]

I don\'t trust the temp switches at all. I wouldn\'t forget to turn it on I know, because I look at the water temp gauge every 20 seconds. Because my engine runs hot.

[smoothdime]

same here

[sorj]

just get a fan wiring kit that has an adjustable fan thermo switch. It cames with relay, wiring, and iiiiinnnnssssstttrrruuucctiiooonnsss. Used them many times, and if you can\'t find a kit, then e mail me back and I will tell you step by step (even intergrating an override toggle switch if you want) how to wire it along with what parts to use and even some part numbers (ones that I can remember).