PDA

View Full Version : motor mounts


stenaholic
12-07-2002, 04:40 PM
which brands or kits keep the rear end of the engine and the transmission in the same location, so that the only difference after the swap is two more cylinders in the front of the engine compartment

Mike
12-07-2002, 04:48 PM
the stealth mounts will help you with that, the ones that are sold here!

stenaholic
12-07-2002, 04:50 PM
i have a 4x4. will i need to get a tranny mount or new driveshaft? will any angles be changed?

4more
12-07-2002, 05:05 PM
what rans are you planing on using if you have a 4.3 know and use your current trans you should be able to leave it all stock location

Mike
12-07-2002, 05:09 PM
humm, i couldn\'t tell you had a 4x4 because your profile isn\'t filled out.

hoffmandirt
07-14-2004, 04:31 AM
2wd stealth mounts... i am about ready to put my motor in and while i am sitting here at work ..workin hard.. i was just wondering which way the motor mounts go on the block... the pointy side towards the front or the straight side.

FastBikesRule
07-14-2004, 08:01 PM
If I understand you correctly, you want the \"pointy\" side in the back.

Where in PA are you from?