View Full Version : Lowering problem
paock310
12-08-2002, 03:22 AM
I got my blazer lowered 2 in springs in front and 2 in blocks on back. The problem is the back sits 2 in lower then the front now. Does any one know why? It is a 85 tahoe with 350/350. http://www.s10v8.com/images/smilies/icon_frown.gif
4more
12-08-2002, 04:13 AM
howmuch lower over all is the truck ?? this will tell you if the problem is in the rear or the front\"did the front not even go down?\" or \"did the rear go down more than the advertised 2in\"???
mine in my avatar had 2in blocks in the rear and just the weight of the v8 w/4 banger springs in the front and stock 14in wheels
ZZ4Blazer
12-08-2002, 05:22 AM
Are these new springs? Did you just install them? If so, drive on them for a week. They will settle. I didn\'t think mine would, and within just a few days of driving, they dropped another 1 3/4\", they were a 3\" spring.
Sitting there won\'t do it, you need to drive them. Mine sat for 3 weeks, didn\'t make a difference. Drove for a week, thats when it did.
knudsonm
12-08-2002, 02:25 PM
Like ZZ4 says \"You gotta drive it for a while\" I have a 4/6 on my full size Chevy and the 2\" springs settled 2\" after driving for a week.
whiner3
12-09-2002, 08:39 AM
after i drovemine it settled probably ain inch easy... my front end sat about 1/2\" higher than the back but now it\'s a little lower just the way i wanted it
vBulletin® v3.7.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.