Fan Shroud

[OTHCUSTOMS]

For those of you who have a flex fan , did you use the standard shroud for the truck, or did you end up using a diff shroud from a diff car or truck?? http://www.s10v8.com/images/smilies/icon_confused.gif

[racer1182]

depends on what radiator you usei dont have one cause i\'m using a pontiac trans am 305 tpi

[bratass]

Im using a stock 2.8 s10 shroud mounted in a forward position only flipped upside down because it allows use of a larger fan,I also use vette radiator -not using a flex right now because I got a flexalite 400 series that only weighs 11 ounces and will be easier on waterpump bearings http://www.s10v8.com/images/smilies/icon_cool.gif

[OTHCUSTOMS]

ok, well i got the radiator that the sell from this site in the kit, so does anyone know if its a reg fan shroud from an s10 or is it a diff 1?

[bratass]

mine is from an 85 s10 the only reason I flipped it was the 2.8 fan is lower in the engine compartment and the shroud has an up and down offset to compensate vette rad fits perfectly in this shroud

[OTHCUSTOMS]

hmm, so i wonder which would be best for me then, looks like its gonan be trail and error, suks but of well, looks like its will be between the 4.3, the 2.8 and the 4 cylinder 1, if not those then something else